Mining Industry Sand Factory Online Dynamic Realtime Continuous X Ray Rip Detection Mobile Type System for Steel Cord Conveyor Belt
| US$50,000.00 | 1 Set (MOQ) |
Port:
Beijing, China
Production Capacity:
1000pieces/Year
Payment Terms:
T/T
Shanxi Dedicated Measurement Control Co., Ltd.
Shanxi, China
Last Login Date:
Feb 18, 2025
Business Type:
Manufacturer/Factory
Main Products:
X-ray Fault Monitor for Steel Cord Conveyor Belt, X-ray Online Conveyor Belt Scanning System, Steel Crod Conveyor Belt Detection System, NDT Monitoring Equipment for Steel Cord Conveyor
Find Similar Products
Product Description
Company Info
Basic Info.
Model NO.
KJ581-M
After-sales Service
7*24 Online Service
Warranty
1 Year
Trademark
DMC
Transport Package
Flight Case
Specification
1m³ 170kg
Origin
China
HS Code
9022199090
Product Description
Product Description
1. Product introductionDMC Technology specially developed this mobile type X-ray monitor system for steel cord conveyor belt in 2017, which has received high praise from customers, also because of the demand to scan multiple belts with different lengths and widths. This mobile detector is simpler in structure, lighter in weight and easier to install than previous fixed equipment and can scan multiple steel cord conveyor belts in a short time.
2. Product Composition Scheme
(1) X-ray reception controller
By receiving the commands sent by the laptop, it is possible to perform the functions of power control, power on, off, voltage conversion, equipment status monitoring and signal transmission, and send the signals collected by the photoelectric sensor to the laptop from the interface. transmission specified after data transformation.
(2) X-ray generator
It is mainly used to generate and emit the X ray beam. The ray beam will be produced by increasing the voltage and allowing the pressure difference at the ends of the tube to reach 160 kV, which will form in the X-beam after filtering.
(3) Laptop
It will send the control command through the installed special software, and receive, store, analyze and display the images and data.
3. Technical Parameters
4. Product Size and Weight
| Performance parameter | |
| System operating voltage | AC 110V~240V |
| System operating current | ≤ 4A |
| Admissible of rubber belt speed | ≤ 9.6m/s |
| Admissible of rubber belt width | ≤2.2m |
| Admissible of rubber belt thickness | ≤80mm |
| Communication mode | Ethernet Cable |
| Communication distance | ≤20Km |
| Protection grade | Ip57 |
| Resolution rate | 0.8mm×0.8mm |
| Identify minimum fracture | 1.6mm |
| Identify minimum twitch | 3mm |
| Defect positioning error | Horizontal ≤1cm, longitudinal ≤5cm |
| Software operating environment | Windows 7/10 |
| Environmental parameter | |
| Work environment | |
| Environment temperature | -20ºC~+40ºC |
| Average relative humidity | No more than 95% (25°C) |
| Atmospheric pressure | 86~106KPa, occasions where there is explosive mixture, but with no corrosive gas damaging insulation |
| Electrical environment | |
| Supply voltage | AC110V~AC240V |
| Input operating current | ≤4A, consumed power <1000W |
4. Product Size and Weight
| Equipment name | X-Ray Receiver (customize) | X-Ray Generator | Laptop |
| Size | 1270/1470/1670/1870/2070/ 2270*420*70 mm | 610*530*175 mm | / |
| Weight | 18.5-55.5kg | 38.5kg | / |
5.Product Installation
(1) It is installed in the lower belt, which will not affect the normal transport operation of the belt conveyor.
(2) The structure of the product is simple, with free combination of the two, which can be adapted to a belt conveyor in any height, width and length.
(3) It only needs the lower belt of the steel-cord conveyor belt to pass through the middle between the X-ray generator and the X-ray receiving controller.
(4) The product is tightly dust-proof and can be applied to any working conditions, such as raining, snowing, dusty and other environments.
(5) The product is extremely light and convenient, which can be installed, commissioned and tested by 1 person only.
(6) In order to ensure the detection effect and accuracy, it is better to install the device at the position with flat ground and small belt vibration; power supply, with a voltage of AC100V-265V, shall be provided on the site of the device.
(7) Notice: Because it is a mobile device which detects belts in different lengths, widths and heights, it is impossible to give a standard mounting bracket and radiation shield. Users need to make the installation bracket and radiation shield according to the site conditions of the conveyor belt.
6.Product maintenance
(1) As the outer shell of the product is made of metal, and the internal parts are basically electronic components, there is no wear and tear, without need for maintenance.
(2) The service life of the ray generator is limited. Ideally, its service life is 20000 hours.
(3) Please move and place the product carefully, as violent bump and vibration will reduce the service life of the ray generator and even cause the fault of the high-voltage transformer of the ray tube under severe circumstances.
7. Product material
The product shell is made of high-strength aluminum alloy, which not only has high strength, corrosion resistance, and effectively protects the internal components of the product, secondly, the design greatly reduces the weight of the product, highlights the characteristics of mobile type equipment, that it is convenient for transportation and installation. The aluminum alloy material has also greatly improved the grade of the entire device because of its unique texture and touch.
8. Detection case
Send your message to this supplier
People who liked this also liked
US$300.00-1,299.00
1 Piece (MOQ)
US$3,400.00-3,900.00
1 Piece (MOQ)
US$7,000.00
1 Piece (MOQ)
US$1,400.00-1,700.00
1 Piece (MOQ)
US$141.30-145.80
2 pieces (MOQ)
US$1,000.00-5,000.00
1 Piece (MOQ)
Negotiable
1 Piece (MOQ)
US$47.65
1,000 Pieces (MOQ)
US$30,000.00-40,000.00
1 Piece (MOQ)
Negotiable
1 Piece (MOQ)
